**Post: #1**

a. Development of a Slip and Slide Simulator for Electric Locomotive Based on Inverter Controlled Induction Motor

b. Second Order Sliding Mode for Traction Control in Ride-by-Wire Sport Motorcycles

c. Indirect Matrix Converter Based on Investigations of Field-oriented control for Induction Motor

d. SVPWM Techniques and Applications in HTS PMSM Machines Control

e. A 24-pulse AC-DC converter employing a pulse doubling technique for vector controlled induction motor drives

f. Prediction-based ripple reduction in Direct Torque Control of an induction machine

g. DTC-SVM Scheme for Induction Motors Fed with a Three-level Inverter

h. Wound Rotor Induction Generator With Sensor less Control and Integrated Active Filter for Feeding Nonlinear Loads in a Stand-Alone Grid

i. Fuzzy Logic Based Control of Variable Speed Induction Machine wind Generation System

j. Permanent Magnet Synchronous Machine Hybrid Torque Control

k. MRAS based Speed Control of sensorless Induction Motor Drives

l. Optimal Intelligent Controller for Matrix Converter Induction Motor Drive System

m. Fuzzy Logic Speed Control of a DC Motor

n. Harmonic Mitigation in ACâ€œDC Converters for Vector Controlled Induction Motor Drives

o. Wind-Driven Self-Excited Induction Generator With Voltage and Frequency Regulated by a Reduced-Rating Voltage Source Inverter

p. Direct Torque Control of Five-Phase Induction Motor Using Space Vector Modulation with Harmonics Elimination and Optimal Switching Sequence

q. New DTC Control Scheme for Induction Motors fed with a Three-level Inverter

r. A Closed Loop Observer for Rotor Flux Estimation in Induction Machines

s. Matlab/Simulink Implementation for Reducing the Motor Derating and Torque Pulsation of Induction Motor using Matrix Converter

t. A New Topology for Unipolar Brushless DC Motor Drive with High Power Factor

u. Simulink Implementation of Induction Machine Model â€œ A Modular Approach

v. Space Vector Control of 5-phase PMSM supplied by 5 H-bridge VSIs

w. Minimization of torque ripple in SRM drives

x. Switching Frequency Imposition and Ripple Reduction in DTC Drives by Using Multilevel Converter

y. The Use of Matrix Converters in Direct Torque Control of Induction Machines

z. Torque-Ripple Minimization in Switched Reluctance Motors Using Adaptive Fuzzy Control

aa. Torque-Ripple Minimization in Switched Reluctance Machines Over a Wide Speed Range

bb. PMSM Speed Sensor less Direct Torque Control Based on EKF

cc. Direct torque with fuzzy logic ripple reduction based stator flux vector control

dd. Sensor less Speed Estimation of Induction Motor in a Direct Torque Control System

ee. Simulation of a Space Vector PWM Controller for a Three-Level Voltage Fed Inverter Motor Drive

ff. Sensor less Control of Interior Permanent-Magnet Machine Drives With Zero Phase Lag Position Estimation

gg. Simulink implementation of Induction motor model

hh. Sensor less Control of Interior Permanent-Magnet Machine Drives With Zero-Phase Lag Position Estimation

ii. Development of Low Cost Multi Phase Brushless DC (BLDC) Motors with Unipolar Current Excitations.

jj. A simple Circuit-Oriented model for predicting six-phase induction machine performances.

kk. A Matlab/Simulink Model Based on power system block set-A new Direct Torque Control Strategy for Interior Permanent Magnet Synchronous Machine Drive System

ll. Fuzzy Logic Control of a Switched Reluctance Motor

mm. Direct Torque Control of a Permanent Magnet Synchronous Motor with Pulse Width Modulation using Fuzzy Logic

nn. Project list