Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fuzzy based Washing Machine
Post: #1

Fuzzy Logic has played a pivotal part in this age of rapid technological development .In this paper we have elaborated on the automation process used in a washing machine. This paper has focused on the two subsystems of the washing machine namely the sensor mechanism and the controller unit. It also discuss on the use of singletons for fuzzy sets. This paper also highlights the use of a fuzzy controller to give the correct wash time. The use of fuzzy controller has the advantage of managing time, increasing equipment effiency and diagnosing malfunctions.


Classical feedback control theory has been the basis for the development of simple automatic control systems .It is easily comprehensible principle and relatively simple implementation has been the main reason for its wide applications in industry. Such fixed-gain feedback controllers are insufficient, however to compensate for parameter variations in the plant as well as to adapt to changes in the environment. The need to overcome such problems and to have a controller well-tuned not just for one operating point for a whole range of operating points has motivated the idea of an adaptive controller.

In order to illustrate some basic concepts in fuzzy logic consider a simplified example of a thermostat controlling a heater fan illustrated in fig.1.The room temperature detected through a sensor is input to a controller which outputs a control force to adjust the heater fan speed.

A conventional thermostat works like an ON/OFF switch. If we set it at 78F then the heater is activated only when the temperature falls below 75F.When it reaches 81F the heater is turned off .As a result the desired room temperature is either too warm or too hot.

A fuzzy thermostat works in shades of gray where the temperature is treated as a series of overlapping ranges .For example, 78F is 60% warm and 20% hot .The controller is programmed with simple if-then rules that tell the heater fan how fast to run. As a result, when the temperature changes the fan speed will continuously adjust to keep the temperature at desired level. Our first step in designing such a fuzzy controller is to characterize the range of values for the input and output variables of the controller. Then we assign labels such as cool for the temperature and high for the fan speed, and we write a set of simple English-like rules to control the system. Inside the controller all temperature regulating actions will be based on how the current room temperature falls into these ranges and the rules describing the system behavior .The controller's output will vary continuously to adjust the fan speed.

The temperature controller described above can be defined in four simple rules:

If temperature is COLD then fan speed is HIGH
If temperature is COOL then fan speed is MEDIUM
If temperature is WARM then fan speed is LOW
If temperature is HOT then fan speed is ZERO
Here the linguistic variables cool; warm, high, etc. are labels, which refer to the set of overlapping values. These triangular shaped values are called membership functions.

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: review of related literature of washing machine, how to give a seminar on washing machine, washing machine control of 8051 microcontroller wikipedia, analyse the factors demanded for washing machine detergent, fuuzy based washing machine with text message, washing machion ppt for semionar, application of 8051 in washing machine,

Quick Reply
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  EMBEDDED SECURITY SYSTEM IN AUTOMATED TELLER MACHINE seminar class 2 1,938 30-09-2013 10:56 AM
Last Post: computer topic
  OPTIMIZATION OF UPFC USING FUZZY LOGIC projectsofme 2 1,529 05-04-2013 11:42 AM
Last Post: computer topic
  PH Control Technique using Fuzzy Logic computer science crazy 1 3,030 16-03-2012 10:23 AM
Last Post: seminar paper
  FUZZY LOGIC CONTROL OF A SWITCHED RELUCTANCE MOTOR projectsofme 1 1,871 29-02-2012 10:16 AM
Last Post: seminar paper
  Automatic Teller Machine (ATM) computer science crazy 5 9,350 16-02-2012 04:46 PM
Last Post: seminar paper
  ELEMENTARY MACHINE LEARNING FOR WEBMINING full report project topics 1 1,221 15-02-2012 12:00 PM
Last Post: seminar paper
  Induction Motor Speed Control using Fuzzy Logic Controller full report seminar topics 1 4,972 13-02-2012 03:31 PM
Last Post: seminar paper
  Fuzzy - Based Representative Quality Power Factor for Unbalanced Three - Phase Sy Wifi 0 663 28-10-2010 10:28 AM
Last Post: Wifi
  Dynamic Fuzzy-Neural Network Controller for Induction Motor Drive project report helper 0 531 13-10-2010 03:02 PM
Last Post: project report helper
Last Post: seminar surveyer