Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Induction motors vector control Drive using sliding mode flux observer full report
Post: #1

The field oriented control emerged as an important approach for the control of AC machines, and continues to be explored and developed in the literature. The estimation of the rotor flux from the measurable variables was the only method used to implement the vector control of the induction machine. To replace the estimator based on the mathematical model of the system, which can lead to unintended errors due to uncertainties on the model and on the measures we use an appropriate observer.

Presented By:
Cherif Mokhtar, Azzedine Bendiabdellah, Abdelkader Mezouar and Ameur Fethi Aimer
Department of Electrical Engineering, University of Science and Technology Oran, Algeria.
field orientation technique namely the Rotor flux orientation introduced by BLASCHKE in 1972, has made it possible to act independently on the rotor flux and the electromagnetic torque which gives us an induction machine as good in the areas of variable speed drive as a DC machine, but the aimed decoupling can not be insured in steady states when the rotor flux amplitude is kept constant, which presents a serious constraint especially for rotating machines at high speeds ( higher than the nominal speed) [1]. A Nonlinear control is often necessary for best performance. The sliding mode control is a technique that works as well with the linear systems as with nonlinear systems. This technique has two stages: Forcing the variable control of the system to reach an hyper-surface as quickly as possible, then slides until it reaches a certain point, during its second phase, the system is in a sliding state and its dynamic behaviour is independent of system parameters, as well as disturbances, and therefore insensitive to parameter variations. Whatever the technique used (classical or sliding mode control) knowledge of the values of state variables is required. The use of sensors causes the congestion of the installation and creates fragility and disability of precision. Faced with these problems, we use a sliding mode observer.

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: controllable coupling of superconducting flux qubits, mechanical engineering gearbox sliding mesh gearbox, seminar report for i mode technolohy, matlab mfile algorithm for sliding mode control, video of sliding mesh gearbox free download, flux probe detection technology ppt, sliding mesh gearbox pdf,

Quick Reply
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Space Vector Pulse Width Modulation (SVPWM) Scheme for Inverter Using MATLAB/SIMULINK project report helper 11 7,610 25-05-2016 01:38 AM
Last Post: Guest
  DC MOTOR CONTROL USING CHOPPER seminar class 3 4,720 25-11-2015 02:00 PM
Last Post: seminar report asees
  A Neural-Network-Based Space-Vector PWM Controller for Voltage-Fed Inverter Inducti project report helper 1 1,269 07-09-2015 06:23 PM
Last Post: hafsa_012
  man made sun full report seminar presentation 2 2,557 26-12-2014 05:39 AM
Last Post: Guest
  microprocessor based system of automatic synchronizer full report computer science technology 10 7,221 05-09-2014 10:44 PM
Last Post: seminar report asees
  artificial intelligence techniques in power systems full report computer science technology 3 4,535 08-08-2014 10:39 PM
Last Post: seminar report asees
  thermoelectric power generation full report project report tiger 8 6,785 07-03-2014 07:43 PM
Last Post: Guest
  powerline communication full report computer science technology 15 15,235 02-09-2013 11:28 AM
Last Post: computer topic
  gas insulated substation full report project report tiger 14 34,782 06-08-2013 01:14 PM
Last Post: Guest
  High Performance Motor Drive Using Matrix Converter project topics 3 1,859 27-07-2013 10:35 AM
Last Post: computer topic