Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Intelli Voice Controlled Wheelchair Automation
Post: #1

Hi, can u suggest me for these project ideas "Intelli Voice Controlled Wheel Chair Automation"
Post: #2
Intelli voice controlled wheel chair automation
This system is based on addressing spatial knowledge representation and reasoning.
It uses stereo color vision, in addition to ultrasonic and infrared sensors.The structure of the environment is learned through local observations.The system controls the wheelchairâ„¢s direction by observing the direction of the userâ„¢s face, under the assumption that a person will look where he wants to go.ultrasonic sonars are used to choose the sensitivity of the program
to a userâ„¢s head movement. For close obstacles, the system smoothes over a large number of frames, making the system ignore small head movements since the user
may look at the close obstacles.For long readings from the sonars, smoothing is done over a smaller number of frames to allow for finer control in open spaces.

Wheelsey, a project from the MIT navigates when The user tells the robot where to move using high level commands such as forward or right. The robot carries out each command using its sensors and control code to safely navigate. A robotic wheelchair system should not be limited to one particular location, either by requiring maps or by environment modification. A new system called the subsumption system is used. In the subsumption system, many processes are running on a robot simultaneously. Layers of behaviors causes the most relevant behavior to be selected at any given time while the other behaviors are suppressed. This architecture allows for robots to reactively interact with the world instead of requiring lots of planning.

The drive wheels are centered on either side of the base, allowing the
chair to turn in place. There are two front casters and a rear caster with spring
Sensors: 12
SUNX proximity sensors
-ultrasonic range sensors
-shaft encoders
-Hall effect sensors
A 68332 processor is used to control the robot and process sensor information. A Macintosh Powerbook is used for the robotâ„¢s GUI.

Seminar report download:
Post: #3
We know that the intelligent wheelchairs are a very good solution to assist severely handicapped people who are unable to walk. Might that this system has need more support so that it will take a good chances to develop it. This kind of project has a advantage for the technology.
Post: #4
to get information about the topic VOICE CONTROLLED WHEELCHAIR FOR THE DISABLED full report ,ppt and related topic please refer link bellow

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: shoulder movement controlled power wheelchair, project report on voice controlled wheelchair for parallysed pateints, intelligent wheelchair topics*, voice controlled wheelchair project source code, how to use 8051 microcontroller wheelchair, tongue motion controlled wheelchair, voice based wheelchair using embedded systems,

Quick Reply
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Industrial automation using cell phone KalaravRajpura 5 1,990 27-05-2013 10:45 AM
Last Post: computer topic
  industrial automation using cellphones trafila 3 1,194 19-03-2013 02:03 PM
Last Post: computer topic
Last Post: Guest
  ic controlled emergency light with charger susan 2 1,941 08-12-2012 04:35 PM
Last Post: seminar details
  HOME AUTOMATION BY USING BLUETOOTH bapun 6 4,290 05-12-2012 01:47 PM
Last Post: seminar details
  cell phone controlled robot Guest 2 828 29-10-2012 04:05 PM
Last Post: seminar details
  Industrial automation using cell phone engdarling 2 1,724 19-10-2012 12:47 PM
Last Post: seminar details
Thumbs Up Laser torch based voice transmitter and receiver amit gurav 2 1,793 17-10-2012 01:02 PM
Last Post: seminar details
  Fabrication of voice operated wheel chair vinay4real 4 3,530 11-10-2012 01:41 PM
Last Post: seminar details
  Hybrid SCADA for Power station Substation Monitoring & Automation Reference: http:// sandeepde25 2 1,521 09-10-2012 12:15 PM
Last Post: seminar details