Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sensotronic Brake Control
Post: #1

Sensotronic Brake Control

Sensotronic Brake Control (SBC„¢) works electronically, and thus faster and more precisely, than a conventional hydraulic braking system. As soon as you press the brake pedal and the sensors identify the driving situation in hand, the computer makes an exact calculation of the brake force necessary and distributes it between the wheels as required. This allows SBC„¢ to critically reduce stopping distances. SBC„¢ also helps to optimise safety functions such as ESP®, ASR, ABS and BAS.

With Sensotronic Brake Control, electric impulses are used to pass the driver's braking commands onto a microcomputer which processes various sensor signals simultaneously and, depending on the particular driving situation, calculates the optimum brake pressure for each wheel. As a result, SBC offers even greater active safety than conventional brake systems when braking in a corner or on a slippery surface.

A high-pressure reservoir and electronically controllable valves ensure that maximum brake pressure is available much sooner. Moreover, the system offers innovative additional functions to reduce the driver's workload. These include Traffic Jam Assist, which brakes the vehicle automatically in stop-and-go traffic once the driver takes his or her foot off the accelerator. The Soft-Stop function - another first - allows particularly soft and smooth stopping in town traffic

When drivers hit the brake pedal today, their foot moves a piston rod which is linked to the brake booster and the master brake cylinder. Depending on the pedal force, the master brake cylinder builds up the appropriate amount of pressure in the brake lines which - in a tried and tested interaction of mechanics and hydraulics - then presses the brake pads against the brake discs via the wheel cylinders.

By contrast, in the Mercedes-Benz Sensotronic Brake Control, a large number of mechanical components are simply replaced by electronics. The brake booster will not be needed in future either. Instead sensors gauge the pressure inside the master brake cylinder as well as the speed with which the brake pedal is operated, and pass these data to the SBC computer in the form of electric impulses. To provide the driver with the familiar brake feel, engineers have developed a special simulator which is linked to the tandem master cylinder and which moves the pedal using spring force and hydraulics.

In other words: during braking, the actuation unit is completely disconnected from the rest of the system and serves the sole purpose of recording any given brake command. Only in the event of a major fault or power failure does SBC automatically use the services of the tandem master cylinder and instantly establishes a direct hydraulic link between the brake pedal and the front wheel brakes in order to decelerate the car safely.

The central control unit under the bonnet is the centrepiece of the electrohydraulic brake. This is where the interdisciplinary interaction of mechanics and electronics provides its greatest benefits - the microcomputer, software, sensors, valves and electric pump work together and allow totally novel, highly dynamic brake management:
In addition to the data relating to the brake pedal actuation, the SBC computer also receives the sensor signals from the other electronic assistance systems.

For example, the anti-lock braking system (ABS) provides information about wheel speed, while Electronic Stability Program (ESP®) makes available the data from its steering angle, turning rate and transverse acceleration sensors. The transmission control unit finally uses the data highway to communicate the current driving range. The result of these highly complex calculations is rapid brake commands which ensure optimum deceleration and driving stability as appropriate to the particular driving scenario. What makes the system even more sophisticated is the fact that SBC calculates the brake force separately for each wheel.

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: brake control adapters, operating unit on sensotronic brake control sbc, project mu d1 brake pads, sensotronic brake systeme, reaserch paper on sensotronic brake control, report on sensotronic brake control system, project on brake linings,

Quick Reply
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  AIR BRAKE SYSTEM seminar class 3 4,916 02-04-2015 04:22 PM
Last Post: seminar report asees
  sensotronic brake control full report computer science technology 13 21,683 07-10-2014 10:01 PM
Last Post: seminar report asees
  Noise Control in IC Engines full report project report tiger 5 13,311 26-08-2014 10:03 PM
Last Post: Guest
Question A regenerative brake Computer Science Clay 9 6,918 03-06-2013 11:31 AM
Last Post: computer topic
  VTEC ( Variable valve Timing and lift Electronic Control) Computer Science Clay 3 3,683 04-12-2012 12:49 PM
Last Post: seminar details
  Sensotronic brake control mechanical wiki 1 1,730 17-11-2012 11:52 AM
Last Post: seminar details
Last Post: seminar details
  Adaptive Control machining full report project report tiger 2 5,032 17-10-2012 01:55 PM
Last Post: seminar details
  Cruise Control Systems in Cars summer project pal 2 3,384 11-10-2012 03:14 PM
Last Post: seminar details
  FSAE Engine Control Unit computer girl 0 636 08-06-2012 12:07 PM
Last Post: computer girl