Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Telephone Triggered Switches
Post: #1

How would you like to be able to energize any electrical device in your home., from any where in the world. and do it without paying for a telephone call? You can do it and it's perfectly legal. With the Telephone Triggered Switches you can do just that. The device described here is a circuit, which responds to the sound of the telephone Deli There is no need to make any hard wire connections to the telephone line, and it is this feature which permits you to build and use this device without any permission from the Department of Telecommunications.

You can't even be charged any tariff for using it in these days of high energy costs, it would be economical to turn off the air conditioning or the hot water geyser before you leave the house, and turn it on an hour before you arrived home. It could be used to turn on the lighting in the house, at night, before you return home.


The TTS is a fairly precise device that would find a use in many a home. It basically consists of circuitry that detects the telephone ring, which then is passed on to the Counter & decoder Section which keeps a track of the number of rings received. Upon the reception of the rust ring, a ninety-second timer is triggered. The, Whole -operation should be completed within this 90-second period or the entire circuitry is reset.

Two devices can be connected to the TTS. The first device can be activated by calling the telephone number and terminating the call after 2 rings. The same telephone no. has to be called again after a gap of 25-40 seconds and then allowing for 2 more rings, following which, the call has to be terminated. For the second device to be activated the sequence o be followed is 2 rings, followed by a 25-46 second gap followed by 4 more more rings. The gap between the two sequences of rings should not fall short of 25 seconds, else it may reset the TES.

After the second ring is received, the 25-second timer is triggered. If a third ring were received before this delay is over, the TTS would reset. This precautionary measure prevents accidental activation of the devices connected to the TTS
Upon the completion of the 25-second delay, the third and fourth rings are received. When the 4th ring is received the 25-second timer is triggered for the second time. The relays for the two devices will be activated only after this 25-second delay. This is again a precautionary measure, since if the TTS were to receive more than the specified number of 2 rings (for device 1) or 4 rings (for device 2), the relays will not activate.

If, after the 25-second delay the decoder shows a total of 4 rings, then relay 1 is energized, which in turn activates device 1. Or if a total of 6 rings were received device 2 is activated by means of relay 2. After the completion of 90 seconds the ITS is reset, but since the relays used are of the double contact type the connection of the device, to the 230 volts mains, does not break. So the device remains on once it is activated by the TTS.

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: the islip scheduling algorithm for input queued switches, gareeb geyser, timer circuits relay switches, satellite telephone directories, how to face telephone interview, telephone enquiries, gsm mobile telephone,

Quick Reply
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  telephone call recorder seminar presentation 2 2,686 28-11-2012 12:40 PM
Last Post: seminar details
  MEMS Switches smart paper boy 0 578 09-07-2011 12:47 PM
Last Post: smart paper boy
  2-LINE INTERCOMCUM- TELEPHONE LINE CHANGEOVER CIRCUIT seminar class 0 896 04-05-2011 02:41 PM
Last Post: seminar class
  PARALLEL TELEPHONE WITH AUTOSECRECY-: seminar class 0 815 22-04-2011 10:31 AM
Last Post: seminar class
  Telephone Controlled Remote Switch project topics 1 1,263 20-04-2011 04:38 PM
Last Post: seminar class
  Telephone Controlled Motor project topics 0 566 18-04-2011 09:56 AM
Last Post: project topics
  Parallel Telephone project topics 0 505 18-04-2011 09:47 AM
Last Post: project topics
  MOBILE OR TELEPHONE LANDLINE BASED INDUSTRIAL LOAD CONTROL full report seminar surveyer 0 2,594 20-01-2011 04:30 PM
Last Post: seminar surveyer
  VOICE TRIGGERED HOME APPLIANCES seminar surveyer 0 976 01-01-2011 02:39 PM
Last Post: seminar surveyer
  TELEPHONE OPERATED DEVICE CONTROL project topics 0 1,055 13-12-2010 01:22 PM
Last Post: project topics