Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
working model of maglev
Post: #1

working model of maglev
Post: #2
A true MagLev train is a very complex device,one can build a mock-up of a simple train that levitates along a 1-foot (approx ) track just by using permanent magnets and com mon materials. It is based on the principles that we know about magnetism.
board, posterboard, or cardboard.
Using magnets, students will construct the track.the magnets must be aligned in a certain way for this to work.taping the magnets together so that like poles line up is not as easy as it first seems.
Permanent magnets alone cannot suspend a train . You'd also need coils, amplifiers, and negative feedback too.The use of coils and electronics is difficult. Instead of using coils and electronics, we just put guide rails on the sides of the track which will lightly touch your train and keep it centered.The lifter-rails used under your train will be small square ceramic magnets commonly available.
lay all the magnets down with the same pole facing upwards. Strap them together. To make the guiding rails, stick them to a strip of duct tape, then lay the strip down on the cardboard or wood and rub the tape down to hold the magnets underneath. The two rwos must be parallel.
For the rail cars, Tape four magnets to the corners of a cardboard 9cm by 15cm, flipping the magnets correctly so they will repel from the tracks when the cardboard is layed down. place your cardboard "car" on your magnet track.
visit this link for more details:

details on the control system of a maglev train:

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: working model of invert gate, maglev trains, some mcq on maglev com, working model for chemistry, working model on maglev trains, working of ic 7493, avgf working,

Quick Reply
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  working principle of luggage security system Guest 2 132 23-07-2016 09:49 AM
Last Post: jaseela123
  how to make a model of electronic voting machine of thermocol at home Guest 2 341 23-07-2016 09:43 AM
Last Post: jaseela123
  how to make a working model of drip irrigation system for school Guest 2 219 22-07-2016 03:03 PM
Last Post: jaseela123
  model of laptop by thermocol for school project kids Guest 1 152 21-07-2016 03:48 PM
Last Post: visalakshik
  hacked working kirtu accounts Guest 1 161 16-07-2016 12:53 PM
Last Post: jaseela123
  which sdlc model to use for online shopping system and why Guest 1 150 05-07-2016 12:05 PM
Last Post: visalakshik
  making water pollution model on thermocol sheet Guest 1 141 04-07-2016 02:49 PM
Last Post: visalakshik
  images of simple working models for commerce Guest 1 201 04-07-2016 12:17 PM
Last Post: visalakshik
  how to make working model of anti collision device Guest 1 101 04-07-2016 10:58 AM
Last Post: visalakshik
  matlab simulink model of pumped storage hydro scheme Guest 1 120 02-07-2016 04:16 PM
Last Post: visalakshik